Keep essential home circuits operating during an outage with the Nature's Generator L3600 Home Power Backup.This expandable battery backup system combines a powerful 3,600W pure sine wave inverter, a 3,072Wh LiFePO4 battery, flexible solar and AC charging, and a 120V 30A six-circuit manual transfer switch for safe home integration.

The L3600 delivers quiet, fume-free backup power without gasoline, propane, engine maintenance, or outdoor generator operation. It is designed for refrigerators, freezers, lights, communications equipment, televisions, computers, select kitchen appliances, power tools, RV equipment, and other compatible 120V loads.

Choose from multiple solar and battery configurations to match your desired charging speed and backup runtime. Available packages include 100W solar panels, high-output 440W bifacial solar panels, and an L3600 Power Pod expansion battery.

Nature's Generator L3600 Home Backup Features

• 3,600W Continuous Output:Supplies dependable 120V pure sine wave power for essential appliances, electronics, tools, RV equipment, and selected home circuits.

• 7,200W Peak Output:Provides additional short-duration starting power for compatible appliances and equipment with higher startup requirements.

• 3,072Wh LiFePO4 Battery:The integrated 51.2V, 60Ah lithium iron phosphate battery offers stable performance, improved thermal safety, and more than 3,000 charging cycles.

• Expandable to 18,432Wh:Connect as many as five compatible L3600 Power Pods to increase total energy storage and extend backup runtime.

• Six-Circuit Home Integration:The included 120V 30A manual transfer switch allows the L3600 to supply up to six selected 120V household circuits during an outage.

• Up to 2,400W Solar Charging:The integrated MPPT charge controller supports high-output solar charging for renewable off-grid power and faster daytime recharging.

• Flexible AC Charging:Recharge from AC power at either 600W or 1,800W, depending on the selected charging setting and available electrical source.

• 150W Wind Charging Support:Accepts up to 150W from a compatible Nature's Generator wind turbine through the shared solar and wind charging port.

• Fast Backup Switching:Less than 10-millisecond automatic switching helps compatible connected equipment remain powered during a utility interruption.

• Multiple Output Connections:Includes four NEMA 5-20R outlets, one TT-30R outlet, USB-A, fast-charge USB-A, USB-C, and 12V DC connections.

• Quiet and Emission-Free:Produces electricity without gasoline, exhaust fumes, engine noise, oil changes, or fuel storage.

• Portable Wheeled Design:Built-in wheels and a retractable handle make the L3600 easier to reposition around the home, garage, RV, campsite, or work area.

• Safety Certified:The L3600 is certified to ANSI/CAN/UL 2743 standards for portable power packs. The included transfer switch is certified to UL 1008 and CAN/CSA C22.2 No. 178.1.

Backup Power for Six Essential Home Circuits

The included six-circuit manual transfer switch provides a safer, cleaner way to connect the L3600 to selected circuits in your electrical panel. Instead of running extension cords through doors and windows, you can choose up to six compatible 120V circuits for essential loads such as:

• Refrigerators and freezers

• Interior lights

• Internet and communications equipment

• Televisions and computers

• Garage-door openers

• Security equipment

• Selected receptacles

• Other compatible 120V appliances

Installation notice:The transfer switch should be installed by a qualified electrician in accordance with the manufacturer’s instructions and all applicable electrical codes. The single L3600 produces 120V single-phase power and should not be represented as powering 240V household circuits by itself.

Expandable LiFePO4 Battery Storage

The L3600 begins with 3,072Wh of internal battery capacity. Up to five compatible L3600 Power Pods can be connected to increase total storage capacity to as much as 18,432Wh.

Expandable storage allows you to increase backup runtime without replacing the original power station. Actual runtime depends on total battery capacity, connected load, appliance cycling, temperature, and conversion losses.

High-Performance LiFePO4 Battery

The L3600 uses lithium iron phosphate battery chemistry for dependable long-term energy storage. The battery is rated to retain more than 70% capacity after 3,000 charging cycles under the manufacturer’s specified conditions.

A built-in battery management system helps supervise charging, discharging, voltage, current, and temperature to support safe, consistent operation.

Up to 2,400W of Solar Charging

Recharge the Nature's Generator L3600 with compatible solar panels through its integrated MPPT solar charge controller. The system supports as much as 2,400W of solar charging, allowing you to build a renewable home-backup or off-grid power system.

Actual solar production depends on the selected panel package, available sunlight, panel direction, installation angle, temperature, shading, cable length, and environmental conditions.

Available L3600 Home Power Backup Packages

L3600 with Two 100W Rigid Solar Panels and Six-Circuit Transfer Switch

• One Nature's Generator L3600 Power Station

• Two 100W rigid monocrystalline solar panels

• One 120V 30A six-circuit manual transfer switch

• One 50-foot solar-panel cable

• One AC power cord

L3600 with Two 440W Bifacial Solar Panels and Six-Circuit Transfer Switch

• One Nature's Generator L3600 Power Station

• Two 440W rigid bifacial solar panels

• One 120V 30A six-circuit manual transfer switch

• One 50-foot solar-panel cable

• One AC power cord

L3600 with Power Pod, Four 440W Bifacial Solar Panels and Six-Circuit Transfer Switch

• One Nature's Generator L3600 Power Station

• One Nature's Generator L3600 Power Pod

• Four 440W rigid bifacial solar panels

• One 120V 30A six-circuit manual transfer switch

• One 50-foot solar-panel cable

• One pair of 10-foot MC4 branch cables

• One AC power cord

Package notice:Contents vary by the selected Shopify variant. Review the selected option before ordering to confirm the included solar panels, expansion battery, transfer switch, and cables.

Nature's Generator L3600 Specifications

Six-Circuit Transfer Switch Specifications

Frequently Asked Questions

Can the Nature's Generator L3600 power home circuits?

Yes. The included 120V 30A six-circuit manual transfer switch can connect the L3600 to as many as six selected 120V household circuits. Professional installation is recommended.

Does one L3600 provide 240V power?

No. A single L3600 provides 120V single-phase output. Do not connect a single L3600 to appliances or circuits requiring 240V power.

How much battery storage does the L3600 provide?

The L3600 includes a 3,072Wh LiFePO4 battery. Connecting as many as five compatible L3600 Power Pods can increase total storage capacity to 18,432Wh.

How many watts can the L3600 supply?

The L3600 supplies 3,600W of continuous pure sine wave power and supports up to 7,200W of short-duration peak output.

How can the L3600 be recharged?

The power station supports AC charging at 600W or 1,800W, solar charging up to 2,400W, and wind charging up to 150W through the shared renewable-energy input.

How long will the L3600 run my appliances?

Runtime depends on appliance wattage, startup demand, duty cycle, battery state of charge, temperature, and conversion losses. Lower-power appliances generally operate longer than high-demand heating, cooling, or motor-driven equipment.

Are solar panels included?

Yes. The number and type of solar panels depend on the selected variant. Available packages include two 100W rigid panels, two 440W bifacial panels, or four 440W bifacial panels with an L3600 Power Pod.

USA-Based Expert Support

All Pro Generators provides knowledgeable USA-based assistance before and after your purchase. If you need help selecting an L3600 package, estimating appliance runtime, planning solar input, or understanding home transfer-switch integration, call954-249-2314.

Installation must comply with the manufacturer’s instructions and applicable electrical codes. Appliance compatibility and runtime depend on starting wattage, continuous wattage, voltage, total connected load, battery capacity, and operating conditions. Product specifications and package contents may be updated by the manufacturer.