This 7.1 KW , 6.6KW running Mase Marine Generator will provide the continuous you need on the water. The IS is for the special intercooler System- THE INTERCOOLER W/A Assures the perfect functioning of the generator independently of the external ambient temperature, therefore the alternator and the engine will work at ideal temperature optimizing the performance and reliability of the gen-set.
Control Panel (included) The gen-set control panel has short dimensions (86x124mm, 3.4x4.9in.). It is supplied with 10mt wire shielded. Designed with the most modern technology, it is supplied inside with a microchip. The keyboard is made by polyester shockproof with grade of protection IP54 and includes: • Hour-meter. • Start-stop button. • Alarm lamps and low oil pressure. • Engine and alternator high temperature alarm lamps
Engine • Easy access in case of maintenance to the feeding system and lubrication, of the sea/water pump and the air filter. • Safety stop in case of low oil pressure. • Safety stop in case high water/exhaust gas temperature. • Double vibration dumping system. • Oil filter. • Oil drain pump.
Alternator • Synchronous, 2 poles, self-regulated, brush less self-excited. • Rotor and stator epoxy resin coated against external agents. • Insulation class H. • High temperature coilings protection.
Soundproof cabin
A new project engineering design with a structure of a draw piece of
aluminum supporting, painted aluminum panels of high resistance
to external agents.
Of limited weight and easy accessibility to the inner cabin in case
of maintenance services.
Cooling system The cooling of the engine is based on a closed inner flow of coolant. The system is based on a heat exchanger seawater/coolant type, of cupronickel, where the thermal exchange occurs between the two liquids. Two separate pumps contribute to the flow of the coolant and the sea water. The cooling of the air inside the gen-set is obtained through a seawater/air heat exchanger. This provides the efficacious cooling of the alternator and the optimal temperature for the best performance and reliability of the gen-set despite its on board allocation and room temperature.
Engine | 60Hz | |
Model | KUBOTA Z482 | |
Type | Diesel 4 stroke | |
Cylinders (nr.) | 2 | |
Cylinder block material | Cast iron | |
Bore (mm. - in.) | 67 - 2,6 | |
Stroke (mm.- in.) | 68 - 2,6 | |
Displacement (cc. - CID) | 479 - 29,2 | |
Power (hp) |
| 13,3 |
RPM |
| 3600 |
Injection system | Indirect | |
Engine head material | Cast iron | |
Speed governor | Centrifugal mechanical | |
Lubrication system | Forced | |
Engine stop system | Stop solenoid | |
Fuel pump | Electric | |
Fuel pump discharge (cm. - ft) | 70 - 2,3 | |
Starting battery (Ah-V) | 45 - 12 | |
Starter (kW-V) | 0,7 - 12 | |
Max. inclination | 30° | |
Water pump flow (l/min. - gl/min.) | 20 - 5,3 |
Alternator50 Hz | 60Hz | |
Type | Synchronous, 2-poles self excited | |
Cooling | Air/water ( Intercooler W/A ) | |
Voltage (V) | 115 - 230 | 120 - 240 |
Frequency (Hz) | 50 | 60 |
Amps | 53 - 26,5 | 59,2 - 29,6 |
Max. power (kW) | 6,1 | 7,1 |
Continuous power (kW) | 5,6 | 6,6 |
Battery charger output (A-V) | 10-12 | |
Power factor ( cos ø ) | 1 | |
Insulating class | H | |
Voltage stability | ±10% | |
Frequency stability | ±5% |
50 Hz 60Hz
Dimension (Lenght x Width x Height.) | 650 x 468 x 555mm - 25,6x18,4x21,8 (in.) (with soundproof box) | |
Weight | 165 Kg. -364 (lb)(with soundproof box) | |
Noise Level |
| 56 dBA at 7mt |