Engine Parameter | |
Engine Brand Model | Zonsen GB1000EI |
Engine Power | 35HP |
Torque | 74Nm |
Fuel Tank Capacity | 18L |
Max Fuel Consumption | 2.38gal/h |
Fuel Type | Gasoline 87# |
Air Cleaner | Double Filtration |
Oil Filter | Screw Mountiing |
Recommended Oil | SAE 10W-30 |
Oil Volume with Filter | 2.5L |
Maximum Continuous Working Angle | 20° |
Cooling Medium | Forced Cooling |
Alternator | 25A/300W |
Clutch Type | Manual Clutch |
Engine Shaft Diameter | 1.125 in |
Tensioner | Spring Automatic Tensioning |
Belt | 2SB1505LE |
General Dimensions And Weight | |
Overall Length-Feed Table Up | 135 in |
Overall Length-Feed Table Down | 155 in |
Overall Width | 55 in |
Overall Height-Discharge Chute Up | 79 in |
Overall Height-Discharge Chute Down | 92 in |
Overall Weight | 1874 lbs |
Tongue Weight | 198 lbs |
Feed System | |
Feed Roller Orientation | Horizontal |
Feed Roller Nos. | 1 |
Feed Roller Clamp Load | 344 lbs |
Knife Nos. | 4 |
Number Of Feed Roller Motors | 1 |
Feed Roller Clamping Mechanism Type | Spring + Feeding Roller Weight |
Feed Roller Dimension | φ12*11 in |
Minimum Distance From Feed Roller To Blade Housing | 5 in |
Weight Of Feed Roller Assembly | 123 lbs |
Feed Speed | 54ft/min |
Infeed Table Height | 22 in |
Infeed Table Length | 24 in |
Infeed Table Width | 41 in |
Infeed Throat Size | 12*8 in |
Distance From Feed Roller To End Of Feed Table | 61 in |
Distance From Feed Table To Ground | 30 in |
Safety System | |
Bottom Feed Stop Bar Function | Feed Roller Stopped - Reset |
Bottom Feed Stop Bar | Standard |
Bottom Feed Stop Bar Diameter | 1.2 in |
Bottom Feed Stop Bar Material Thickness | 0.07 in |
Stop Bar Resetting Method | Manual Reset |
Three-Position Feed Control Bar | Standard |
Control Bar Diameter | 1 in |
Control Bar Material Thickness | 0.07 in |
Control Bar Position Function | Forward/Stop/Reverse |
Red Emergency Stop Button | Stop The Engine |
Red Emergency Stop Button Reset Method | Manual Reset |
Blade Housing Parameter | |
Chipping Capacity | 8 in |
Blade Housing Width | 7 in |
Cutting Disc Size | 30*0.7 in |
Cutting Disc Rotating Speed | 1800 RPM |
Weight With Shaft | 225 lbs |
Safety Lock - Number Of Positions | 1 |
Blade Size | 4*1*0.5 in |
Blade Cutting Edge Nos. | 2 |
Blade Bolt Nos. | 3 |
Vertical Anvil Size | 3.5*7.8*0.5 in |
Vertical Anvil Cutting Edge Nos. | 2 |
Horizontal Anvil Size | 3.7*11.6*0.4 in |
Horizontal Anvil Cutting Edge Nos. | 2 |
Blade Material | A8 Steel |
Anvil Material | Cr12 |
Blade Holder Replaceable | No |
Fan Blades Nos. | 4 |
Fan Blade Fixation Method | Bolt Fixing |
Fan Blade Air Flow | 3249CFM |
Disc | |
Bearing Nos. | 2 |
Bearing Hole Diameter | 2 in |
Bearing Type | Spherical Bearing |
Bearing Brand | SKF |
Dynamic Capacity | 23.2KN |
Static Capacity | 27KN |
Tensioner | Automatic Tensioning |
Belt Type | Combined Belt |
Discharge System | |
Chute Height | 97 in |
Flange Thickness | 0.2 in |
Side Wall Thickness | 0.07 in |
Chute Rotation Angle | 360° |
Rotation Type | Manual |
Rotatation Lock | Included |
Rotational Lock Type | Tighten The Dual Handle Bolts |
Hydraulic System | |
Tank Capacity | 7.4 gal |
Recommended Oil Type | hm46 |
System Type | Open Center |
Filtration Method | Return Oil Filtration - 10um |
Pump flow at the maximum RPM | 4.2 gal |
Maximum Pressure | 2102psi |
Electric Control Parameter | |
System Voltage | 12V |
Battery | 12V 48AH |
Display Screen Size | 4.3 in. |
Controller Function | Timer, Automatic Control, Status Display, Speed Display, Etc. |
Shutdown System | Engine |
Trailer Lights | Vehicle Power Supply |
Others | |
Tow Ball Size | 2" Coupler Hitch / 2" Ball Coupler |
Hook Type | Ball Coupler |
Axle Load-Bearing Capacity | 2756 lbs Torsion Shaft |
Mud Guard | Bolt Fixing |
Torque Shaft Type | Solid Torque Shaft |
Tyre | φ594x165R13 |
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soot, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.